HTD.DA-8M-512-8M

　　Product classification: round and single double-sided tooth synchronous belt -D8M synchronous belt series
　　Product description: rubber trapezoid double layer tooth synchronous belt of the belt is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. In addition, the polyurethane is the double-sided tape of the material. The products have the characteristics of dynamic flexion, good anti-cracking, good ozone performance, aging resistance, heat resistance, oil resistance and wear resistance. The model of trapezoid double-sided synchronous belt includes: XL, L, H, XH, XH, XXH, T2.5, T5, T10, T20, AT5, AT10, AT20, etc.

　　1、It is strictly prohibited to break, bend, avoid strong layer damage and lose use value of D8M double tooth synchronous belt.
　　2、D8M is not allowed to be kept in an abnormal bending state for a long time.
　　3、Keep the D8M synchronous belt in the shade.
　　4、When installing, please shorten the center distance and relax the tensioning wheel. It is not allowed to force drag and drag from the bottom of the belt wheel.
　　5、The tooth of the D8M synchronous belt must be at a right Angle to the running direction.
　　6、The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the service life.
　　7、It is found that the D8M double-sided tooth synchronous belt on the active wheel is shifted to one side, the passive wheel should be adjusted and the pressure of the tensioning wheel should be adjusted.
　　8、At the start, the center distance is changed, the D8M double tooth synchronous belt relaxation, the occurrence of jumping tooth phenomenon, should check whether the belt wheel frame is loose, and the positioning of the shaft is not accurate. Adjust and reinforce.
　　9、The D8M double tooth synchronous belt installation must be properly tensioning with different models and bandwidths.
　　10、The tensioning wheel must be mounted on the side of the driving loose side.

　　同The belt drive is a new belt transmission with the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining metallurgy, iron and steel, machinery, medical equipment, the increasing demand, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber is widely used in machine, and other general machinery.

specification	Section line length	Number of teeth	specification	Section line length	Number of teeth	specification	Section line length	Number of teeth
512-8M	512.00	64	1048-8M	1048.00	131	1640-8M	1640.00	205
536-8M	536.00	67	1056-8M	1056.00	132	1648-8M	1648.00	206
552-8M	552.00	69	1064-8M	1064.00	133	1680-8M	1680.00	210
560-8M	560.00	70	1080-8M	1080.00	135	1696-8M	1696.00	212
568-8M	568.00	71	1096-8M	1096.00	137	1728-8M	1728.00	216
576-8M	576.00	72	1104-8M	1104.00	138	1760-8M	1760.00	220
584-8M	584.00	73	1120-8M	1120.00	140	1800-8M	1800.00	225
600-8M	600.00	75	1128-8M	1128.00	141	1824-8M	1824.00	228
608-8M	608.00	76	1136-8M	1136.00	142	1840-8M	1840.00	230
624-8M	624.00	78	1144-8M	1144.00	143	1888-8M	1888.00	236
632-8M	632.00	79	1152-8M	1152.00	144	1896-8M	1896.00	237
640-8M	640.00	80	1160-8M	1160.00	145	1904-8M	1904.00	238
656-8M	656.00	82	1168-8M	1168.00	146	2000-8M	2000.00	250
680-8M	680.00	85	1176-8M	1176.00	147	2008-8M	2008.00	251
688-8M	688.00	86	1184-8M	1184.00	148	2032-8M	2032.00	254
712-8M	712.00	89	1192-8M	1192.00	149	2080-8M	2080.00	260
720-8M	720.00	90	1200-8M	1200.00	150	2104-8M	2104.00	263
760-8M	760.00	95	1216-8M	1216.00	152	2160-8M	2160.00	270
776-8M	776.00	97	1224-8M	1224.00	153	2176-8M	2176.00	272
800-8M	800.00	100	1248-8M	1248.00	156	2200-8M	2200.00	275
824-8M	824.00	103	1256-8M	1256.00	157	2208-8M	2208.00	276
840-8M	840.00	105	1264-8M	1264.00	158	2240-8M	2240.00	280
848-8M	848.00	106	1272-8M	1272.00	159	2248-8M	2248.00	281
856-8M	856.00	107	1280-8M	1280.00	160	2272-8M	2272.00	284
864-8M	864.00	108	1304-8M	1304.00	163	2304-8M	2304.00	288
872-8M	872.00	109	1312-8M	1312.00	164	2392-8M	2392.00	299
880-8M	880.00	110	1344-8M	1344.00	168	2400-8M	2400.00	300
888-8M	888.00	111	1360-8M	1360.00	170	2504-8M	2504.00	313
896-8M	896.00	112	1392-8M	1392.00	174	2600-8M	2600.00	325
920-8M	920.00	115	1400-8M	1400.00	175	2656-8M	2656.00	332
928-8M	928.00	116	1408-8M	1408.00	176	2800-8M	2800.00	350
936-8M	936.00	117	1424-8M	1424.00	178	2840-8M	2840.00	355
944-8M	944.00	118	1440-8M	1440.00	180	2848-8M	2848.00	356
952-8M	952.00	119	1480-8M	1480.00	185	3048-8M	3048.00	381
960-8M	960.00	120	1520-8M	1520.00	190	3120-8M	3120.00	390
968-8M	968.00	121	1560-8M	1560.00	195	3200-8M	3200.00	400
976-8M	976.00	122	1576-8M	1576.00	197	3280-8M	3280.00	410
984-8M	984.00	123	1584-8M	1584.00	198	3400-8M	3400.00	425
1000-8M	1000.00	125	1600-8M	1600.00	200	3600-8M	3600.00	450
1032-8M	1032.00	129	1608-8M	1608.00	201	4400-8M	4400.00	550
1040-8M	1040.00	130	1624-8M	1624.00	203	5120-8M	5120.00	640

Backwards

Prev:HTD.DA-5M-500-5M－7000-5M

Next:HTD.DA-14M-1750-14M－6860-14M