HTD.DA-5M-500-5M

　　Product classification: round and single double-sided tooth synchronous belt -D5M synchronous belt series
　　Product description: rubber trapezoid double layer tooth synchronous belt of the belt is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. In addition, the polyurethane is the double-sided tape of the material. The products have the characteristics of dynamic flexion, good anti-cracking, good ozone performance, aging resistance, heat resistance, oil resistance and wear resistance. The model of trapezoid double-sided synchronous belt includes: XL, L, H, XH, XH, XXH, T2.5, T5, T10, T20, AT5, AT10, AT20, etc.

　　1、It is strictly forbidden to break, bend, avoid strong layer damage and use value of D5M.
　　2、The D5M double tooth synchronous belt should not be kept in an abnormal bending state.
　　3、Keep the D5M synchronous belt in the shade.
　　4、When installing, please shorten the center distance and relax the tensioning wheel. It is not allowed to force drag and drag from the bottom of the belt wheel.
　　5、The tooth of the D5M synchronous belt wheel must be at a right Angle to the running direction.
　　6、The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the service life.
　　7、It is found that the D5M on the active wheel is shifted to the side by the synchronous belt of the D5M and should be adjusted by moving the passive wheel and adjusting the pressure of the tensioning wheel.
　　8、At the start, the center distance is changed, the D5M double tooth synchronous belt relaxation, the occurrence of jumping tooth phenomenon, should check whether the belt wheel frame is loose, and the positioning of the shaft is not accurate. Adjust and reinforce.
　　9、The D5M double tooth synchronous belt must be equipped with a tensioning force according to different models and bandwidths.
　　10、The tensioning wheel must be mounted on the side of the driving loose side.

　　The belt drive is a new belt transmission with the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining metallurgy, iron and steel, machinery, medical equipment, the increasing demand, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber is widely used in machine, and other general machinery.

specification	Section line length	Number of teeth	specification	Section line length	Number of teeth	specification	Section line length	Number of teeth
500-5M	500.00	100	750-5M	750.00	150	1225-5M	1225.00	245
505-5M	505.00	101	755-5M	755.00	151	1250-5M	1250.00	250
520-5M	520.00	104	770-5M	770.00	154	1270-5M	1270.00	254
525-5M	525.00	105	780-5M	780.00	156	1340-5M	1340.00	268
530-5M	530.00	106	800-5M	800.00	160	1350-5M	1350.00	270
535-5M	535.00	107	810-5M	810.00	162	1380-5M	1380.00	276
540-5M	540.00	108	815-5M	815.00	163	1400-5M	1400.00	280
550-5M	550.00	110	825-5M	825.00	165	1420-5M	1420.00	284
560-5M	560.00	112	830-5M	830.00	166	1455-5M	1455.00	291
565-5M	565.00	113	835-5M	835.00	167	1490-5M	1490.00	298
570-5M	570.00	114	845-5M	845.00	169	1500-5M	1500.00	300
575-5M	575.00	115	850-5M	850.00	170	1595-5M	1595.00	319
580-5M	580.00	116	860-5M	860.00	172	1690-5M	1690.00	338
585-5M	585.00	117	890-5M	890.00	178	1700-5M	1700.00	340
590-5M	590.00	118	900-5M	900.00	180	1720-5M	1720.00	344
600-5M	600.00	120	920-5M	920.00	184	1760-5M	1760.00	352
610-5M	610.00	122	925-5M	925.00	185	1800-5M	1800.00	360
615-5M	615.00	123	935-5M	935.00	187	1870-5M	1870.00	374
625-5M	625.00	125	950-5M	950.00	190	2000-5M	2000.00	400
630-5M	630.00	126	960-5M	960.00	192	2050-5M	2050.00	410
635-5M	635.00	127	965-5M	965.00	193	2100-5M	2100.00	420
640-5M	640.00	128	975-5M	975.00	195	2250-5M	2250.00	450
645-5M	645.00	129	980-5M	980.00	196	2350-5M	2350.00	470
650-5M	650.00	130	1000-5M	1000.00	200	2500-5M	2500.00	500
655-5M	655.00	131	1050-5M	1050.00	210	3255-5M	3255.00	651
670-5M	670.00	134	1080-5M	1080.00	216	3750-5M	3750.00	750
690-5M	690.00	138	1100-5M	1100.00	220	3770-5M	3770.00	754
695-5M	695.00	139	1125-5M	1125.00	225
700-5M	700.00	140	1145-5M	1145.00	229
710-5M	710.00	142	1150-5M	1150.00	230
715-5M	715.00	143	1160-5M	1160.00	232
720-5M	720.00	144	1175-5M	1175.00	235
730-5M	730.00	146	1190-5M	1190.00	238
740-5M	740.00	148	1200-5M	1200.00	240
745-5M	745.00	149	1210-5M	1210.00	242

Backwards

Prev:HTD.DA-3M-501-3M－5010-3M

Next:HTD.DA-8M-512-8M－6880-8M