Hello! Welcome to Kaio (Dongguan) Power Co. LTD official website!
Kaio (Dongguan) Power Co. LTD
Years of experience in the production of transmission products
Hot search:PVC conveyor belt,Special processing belts,Synchronous pulley
4Timing belt -> Rubber timing belt

HTD.DA-14M-1750-14M-6860-14M


  Product classification: circular single - double-sided tooth synchronous belt -D14M synchronous belt series
  Product description: rubber trapezoid double layer tooth synchronous belt of the belt is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. In addition, the polyurethane is the double-sided tape of the material. The products have the characteristics of dynamic flexion, good anti-cracking, good ozone performance, aging resistance, heat resistance, oil resistance and wear resistance. The model of trapezoid double-sided synchronous belt includes: XL, L, H, XH, XH, XXH, T2.5, T5, T10, T20, AT5, AT10, AT20, etc.
  1、It is strictly forbidden to break, bend, avoid strong layer damage and use value of D14M.
  2、The D14M double tooth synchronous belt should not be kept in an abnormal bending state.
  3、Keep the D14M double-side synchronous belt in the shade.
  4、When installing, please shorten the center distance and relax the tensioning wheel. It is not allowed to force drag and drag from the bottom of the belt wheel.
  5、The teeth of the D14M synchronous belt wheel must be at a right Angle to the running direction of the belt.
  6、The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the service life.
  7、It is found that the D14M on the active wheel is on the side of the side of the synchronous belt, it should move the passive wheel to adjust and adjust the pressure of the tensioning wheel.
  8、At the start, the center distance is changed, the D14M double-sided tooth synchronous belt relaxation, the occurrence of jumping tooth phenomenon, should check whether the belt wheel frame is loose, and the positioning of the shaft is not accurate. Adjust and reinforce.
  9、The D14M double - double tooth synchronous belt should be equipped with a tensioning force according to different models and bandwidths.
  10、The tensioning wheel must be mounted on the side of the driving loose side.
  Synchronous belt transmission is a new belt transmission which combines the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining metallurgy, iron and steel, machinery, medical equipment, the increasing demand, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber is widely used in machine, and other general machinery.

specification

Section line length

Number of teeth

specification

Section line length

Number of teeth

specification

Section line length

Number of teeth

966-14M

966.00

69

1610-14M

1610.00

115

2310-14M

2310.00

165

1036-14M

1036.00

74

1652-14M

1652.00

118

2380-14M

2380.00

170

1050-14M

1050.00

75

1750-14M

1750.00

125

2450-14M

2450.00

175

1092-14M

1092.00

78

1764-14M

1764.00

126

2590-14M

2590.00

185

1120-14M

1120.00

80

1778-14M

1778.00

127

2660-14M

2660.00

190

1190-14M

1190.00

85

1806-14M

1806.00

129

2800-14M

2800.00

200

1246-14M

1246.00

89

1820-14M

1820.00

130

3038-14M

3038.00

217

1260-14M

1260.00

90

1890-14M

1890.00

135

3150-14M

3150.00

225

1344-14M

1344.00

96

1946-14M

1946.00

139

3360-14M

3360.00

240

1400-14M

1400.00

100

1960-14M

1960.00

140

3500-14M

3500.00

250

1442-14M

1442.00

103

2002-14M

2002.00

143

3850-14M

3850.00

275

1456-14M

1456.00

104

2044-14M

2044.00

146

4326-14M

4326.00

309

1540-14M

1540.00

110

2100-14M

2100.00

150

4578-14M

4578.00

327

1568-14M

1568.00

112

2240-14M

2240.00

160

4760-14M

4760.00

340