RPP/HPPD-P3M

　　Product classification: round - tooth rubber synchronous belt -RPP3M synchronous belt series
　　Product introduction: compared with trapezoidal tooth synchronous belt, and small tooth root stress concentration, longer life transmitted power than 1.2 2 times the depth of ladder type, and the synchronous gear is better, drive back and forth in the process of clearance is very small. Product belt layer is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. The products include: 2M, 3M, 5M, 8M, 14M, 20M, S2M, S3M, S5M, S5M, S8M, S14M, RPP2M, RPP3M and other models.

　　1、It is strictly forbidden to break, bend, avoid strong damage and use value of RPP3M synchronously.
　　2、The RPP3M synchronous belt should not be stored in an abnormal bending state.
　　3、Keep the RPP3M synchronous belt in a cool place and avoid direct sunlight, so the synchronous belt can age easily.
　　4、During installation, please shorten the center distance, relax the tension wheel, and not force the belt to be loaded from the bottom of the belt wheel.
　　5、The teeth of RPP3M synchronous belt pulley must be at a right Angle to the running direction.
　　6、The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the 　　　　service life.
　　7、It is found that the RPP3M synchronous belt on the active wheel is sideways to one side. It should move the passive wheel to adjust and adjust the pressure of the 　　　　tensioning wheel.
　　8、At the start, the center is changed, the 3M synchronous belt loosens, and the jumping tooth phenomenon should be checked if the wheel frame is loose, and the positioning of the 　　　shaft is inaccurate. Adjust and reinforce.
　　9、RPP3M synchronous belt installation must be properly tensioning with different models and bandwidths.
　　10、The tensioning wheel must be mounted on the side of the driving loose side.

　　Synchronous belt transmission is a new belt transmission which combines the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining metallurgy, iron and steel, machinery, medical equipment, the increasing demand, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber is widely used in machine, and other general machinery.

specification	Section line length	Number of teeth	specification	Section line length	Number of teeth	specification	Section line length	Number of teeth
105-P3M	105.00	35	288-P3M	288.00	96	513-P3M	513.00	171
129-P3M	129.00	43	291-P3M	291.00	97	522-P3M	522.00	174
141-P3M	141.00	47	297-P3M	297.00	99	525-P3M	525.00	175
144-P3M	144.00	48	300-P3M	300.00	100	531-P3M	531.00	177
147-P3M	147.00	49	318-P3M	318.00	106	537-P3M	537.00	179
150-P3M	150.00	50	327-P3M	327.00	109	564-P3M	564.00	188
159-P3M	159.00	53	330-P3M	330.00	110	570-P3M	570.00	190
168-P3M	168.00	56	333-P3M	333.00	111	576-P3M	576.00	192
174-P3M	174.00	58	336-P3M	336.00	112	579-P3M	579.00	193
177-P3M	177.00	59	339-P3M	339.00	113	597-P3M	597.00	199
180-P3M	180.00	60	345-P3M	345.00	115	600-P3M	600.00	200
186-P3M	186.00	62	354-P3M	354.00	118	621-P3M	621.00	207
195-P3M	195.00	65	357-P3M	357.00	119	621-P3M	621.00	211
201-P3M	201.00	67	363-P3M	363.00	121	621-P3M	621.00	216
204-P3M	204.00	68	375-P3M	375.00	125	669-P3M	669.00	223
210-P3M	210.00	70	384-P3M	384.00	128	711-P3M	711.00	237
213-P3M	213.00	71	390-P3M	390.00	130	735-P3M	735.00	245
225-P3M	225.00	75	393-P3M	393.00	131	756-P3M	756.00	252
231-P3M	231.00	77	405-P3M	405.00	135	804-P3M	804.00	268
240-P3M	240.00	80	420-P3M	420.00	140	882-P3M	882.00	294
243-P3M	243.00	81	432-P3M	432.00	144	945-P3M	945.00	315
246-P3M	246.00	82	447-P3M	447.00	149	1062-P3M	1062.00	354
252-P3M	252.00	84	474-P3M	474.00	158	1125-P3M	1125.00	375
255-P3M	255.00	85	480-P3M	480.00	160	1245-P3M	1245.00	415
264-P3M	264.00	88	486-P3M	486.00	162	1263-P3M	1263.00	421
267-P3M	267.00	89	489-P3M	489.00	163	1500-P3M	1500.00	500
270-P3M	270.00	90	501-P3M	501.00	167	1530-P3M	1530.00	510
276-P3M	276.00	92	510-P3M	510.00	170	1863-P3M	1863.00	621

Backwards

Prev:RPP/HPPD-P2M

Next:RPP/HPPD-P5M