RPP/HPPD-P5M

　　Product classification: round - tooth rubber synchronous belt -RPP5M synchronous belt series
　　Product introduction: compared with trapezoidal tooth synchronous belt, and small tooth root stress concentration, longer life transmitted power than 1.2 2 times the depth of ladder type, and the synchronous gear is better, drive back and forth in the process of clearance is very small. Product belt layer is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. The products include: 2M, 3M, 5M, 8M, 14M, 20M, S2M, S3M, S5M, S5M, S8M, S14M, RPP2M, RPP3M and other models

　　1、The RPP5M synchronous belt is strictly prohibited to break, bend, avoid strong layer damage and lose use value.
　　2、The RPP5M synchronous belt must not be stored in an abnormal bending state.
　　3、Keep the RPP5M synchronous belt in a cool place and avoid direct sunlight, so the synchronous belt can age easily.
　　4、During installation, please shorten the center distance, relax the tension wheel, and not force the belt to be loaded from the bottom of the belt wheel.
　　5、The teeth of the RPP5M synchronous belt wheel must be at a right Angle to the running direction.
　　6、The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the 　　　service life.
　　7、It is found that the RPP5M synchronous belt on the active wheel is sideways to one side. It should move the passive wheel to adjust and adjust the pressure of the 　　　tensioning wheel.
　　8、At the start, the center distance is changed, and the 5 m synchronous belt loosens. The jumping tooth phenomenon should be checked if the wheel frame is loose and the positioning of the axle is inaccurate. Adjust and reinforce.
　　9、The RPP5M synchronous belt installation must be properly tensioning with different models and bandwidths.
　　10、The tensioning wheel must be mounted on the side of the driving loose side.

　　Synchronous belt transmission is a new belt transmission which combines the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining metallurgy, iron and steel, machinery, medical equipment, the increasing demand, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber is widely used in machine, and other general machinery.

specification	Section line length	Number of teeth	specification	Section line length	Number of teeth	specification	Section line length	Number of teeth
180-P5M	180.00	36	500-P5M	500.00	100	890-P5M	890.00	178
225-P5M	225.00	45	525-P5M	525.00	105	935-P5M	935.00	187
235-P5M	235.00	47	535-P5M	535.00	107	940-P5M	940.00	188
245-P5M	245.00	49	550-P5M	550.00	110	950-P5M	950.00	190
255-P5M	255.00	51	565-P5M	565.00	113	980-P5M	980.00	196
265-P5M	265.00	53	575-P5M	575.00	115	1000-P5M	1000.00	200
270-P5M	270.00	54	580-P5M	580.00	116	1050-P5M	1050.00	210
285-P5M	285.00	57	600-P5M	600.00	120	1100-P5M	1100.00	220
298-P5M	298.00	59.6	610-P5M	610.00	122	1125-P5M	1125.00	225
300-P5M	300.00	60	635-P5M	635.00	127	1195-P5M	1195.00	239
305-P5M	305.00	61	640-P5M	640.00	128	1200-P5M	1200.00	240
325-P5M	325.00	65	670-P5M	670.00	134	1240-P5M	1240.00	248
345-P5M	345.00	69	675-P5M	675.00	135	1270-P5M	1270.00	254
350-P5M	350.00	70	700-P5M	700.00	140	1420-P5M	1420.00	284
375-P5M	375.00	75	705-P5M	705.00	141	1595-P5M	1595.00	319
400-P5M	400.00	80	710-P5M	710.00	142	1690-P5M	1690.00	338
420-P5M	420.00	84	725-P5M	725.00	145	1790-P5M	1790.00	358
425-P5M	425.00	85	740-P5M	740.00	148	1800-P5M	1800.00	360
450-P5M	450.00	90	755-P5M	755.00	151	1895-P5M	1895.00	379
455-P5M	455.00	91	780-P5M	780.00	156	2000-P5M	2000.00	400
460-P5M	460.00	92	800-P5M	800.00	160	2250-P5M	2250.00	450
465-P5M	465.00	93	835-P5M	835.00	167	3500-P5M	3500.00	700
475-P5M	475.00	95	850-P5M	850.00	170

Backwards

Prev:RPP/HPPD-P3M

Next:RPP/HPPD-P8M