Product classification: round - tooth rubber synchronous belt -RPP2M synchronous belt series
Product introduction: compared with trapezoidal tooth synchronous belt, and small tooth root stress concentration, longer life transmitted power than 1.2 2 times the depth of ladder type, and the synchronous gear is better, drive back and forth in the process of clearance is very small. Product belt layer is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. The products include: 2M, 3M, 5M, 8M, 14M, 20M, S2M, S3M, S5M, S5M, S8M, S14M, RPP2M, RPP3M and other models.
1、The RPP2M synchronous belt is strictly prohibited to break, bend, avoid strong layer damage and lose use value.
2、The RPP2M synchronous belt must not be stored in an abnormal bending state.
3、The RPP2M synchronous belt should be kept in a cool place to avoid direct sunlight, so the synchronous belt will age easily.
4、During installation, please shorten the center distance, relax the tension wheel, and not force the belt to be loaded from the bottom of the belt wheel.
5、The teeth of the RPP2M synchronous belt wheel must be at a right Angle to the running direction.
6、The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the service life.
7、It is found that the RPP2M synchronous belt on the active wheel is sideways to one side, the passive wheel should be adjusted and the pressure of the tensioning wheel should be adjusted.
8、At the start, the center distance is changed, RPP2M synchronous belt relaxation, occurrence jumping tooth phenomenon, should check whether the belt wheel frame is loose, and the positioning of the shaft is inaccurate. Adjust and reinforce.
9、RPP2M synchronous belt installation must be properly tensioning with different models and bandwidths.
10、The tensioning wheel must be mounted on the side of the driving loose side.
Synchronous belt transmission is a new belt transmission which combines the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining metallurgy, iron and steel, machinery, medical equipment, the increasing demand, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber is widely used in machine, and other general machinery.
|
specifications
|
Section line length
|
Number of teeth
|
|
RPP2M-112
|
112.00
|
56
|
|
RPP2M-132
|
132.00
|
66
|
|
RPP2M-200
|
200.00
|
100
|
|
RPP2M-210
|
210.00
|
105
|
|
RPP2M-236
|
236.00
|
118
|
|
RPP2M-364
|
364.00
|
182
|
|
RPP2M-448
|
448.00
|
224
|
|
RPP2M-530
|
530.00
|
265
|
