The metric ladle tooth -T5

　　Product classification: trapezoidal tooth rubber synchronous belt -T5 synchronous belt series.
　　Product synopsis: layer rubber trapezoidal tooth synchronous belt of the belt is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. The products have the characteristics of dynamic flexion, good anti-cracking, good ozone performance, aging resistance, heat resistance, oil resistance and wear resistance. Trapezoidal tooth synchronous belt models include: MXL, XL, L, H, XH, XH, XXH, T2.5, T5, T10, T20, AT5, AT10, AT20, etc.

　　1,It is strictly forbidden to break the T5 synchronously, bend, avoid strong layer damage, and lose use value.
　　2,The T5 synchronous belt should not be kept in an abnormal bending state.
　　3,Keep the T5 synchronous belt in the shade to avoid direct sunlight, so the synchronous belt will age easily.
　　4,During installation, please shorten the center distance, relax the tension wheel, and not force the belt to be loaded from the bottom of the belt wheel.
　　5,The teeth of the T5 synchronous belt wheel must be at a right Angle to the running direction.
　　6,The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the service 　　　life.
　　7,It is found that the T5 synchronous belt on the active wheel is deflated to one side, the passive wheel should be adjusted and the pressure of the tensioning wheel 　　　should be adjusted.
　　8,At the start, the center is changed, the T5 synchronous belt loosens, and the jumping tooth phenomenon should be checked if the wheel frame is loose, and the 　　　positioning of the shaft is inaccurate. Adjust and reinforce.
　　9,T5 synchronous belt installation must be properly tensioning with different models and bandwidths.
　　10,The tensioning wheel must be mounted on the side of the driving loose side.

　　The synchronous belt drive is a new belt drive which combines the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining, metallurgy, iron and steel machinery, medical equipment demand increasing, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber machine, and other widely used in general machinery.

specification	Section line length	Tooth number	specification	Section line length	Tooth number	specification	Section line length	Tooth number
T5×150	150.00	30	T5×410	410.00	82	T5×720	720	144
T5×185	185.00	37	T5×420	420.00	84	T5×725	725	145
T5×200	200.00	40	T5×425	425.00	85	T5×740	740	148
T5×210	210.00	42	T5×450	450.00	90	T5×750	750	150
T5×215	215.00	43	T5×455	455.00	91	T5×780	780	156
T5×220	220.00	44	T5×460	460.00	92	T5×800	800	160
T5×225	225.00	45	T5×475	475.00	95	T5×810	810	162
T5×240	240.00	48	T5×480	480.00	96	T5×815	815	163
T5×245	245.00	49	T5×500	500.00	100	T5×840	840	168
T5×250	250.00	50	T5×510	510.00	102	T5×850	850	170
T5×255	255.00	51	T5×525	525.00	105	T5×860	860	172
T5×260	260.00	52	T5×545	545.00	109	T5×880	880	176
T5×270	270.00	54	T5×550	550.00	110	T5×900	900	180
T5×275	275.00	55	T5×560	560.00	112	T5×990	990	198
T5×280	280.00	56	T5×575	575.00	115	T5×1000	1000	200
T5×295	295.00	59	T5×590	590.00	118	T5×1050	1050	210
T5×300	300.00	60	T5×600	600.00	120	T5×1075	1075.00	210
T5×305	305.00	61	T5×610	610.00	122	T5×1100	1100.00	220
T5×320	320.00	64	T5×620	620.00	124	T5×1200	1200.00	240
T5×325	325.00	65	T5×625	625	125	T5×1215	1215.00	243
T5×330	330.00	66	T5×630	630	126	T5×1270	1270.00	254
T5×340	340.00	68	T5×635	635	127	T5×1380	1380.00	276
T5×350	350.00	70	T5×650	650	130	T5×1420	1420.00	284
T5×355	355.00	71	T5×670	670	134	T5×1630	1630.00	326
T5×365	365.00	73	T5×675	675	135	T5×1780	1780.00	356
T5×375	375.00	75	T5×690	690	138	T5×1800	1800.00	360
T5×390	390.00	78	T5×700	700	140	T5×1960	1960.00	392
T5×400	400.00	80	T5×710	710	142

Backwards

Prev:Public ladder -T2.5

Next:Metric ladle tooth -T10