D-T5-T5x500－T5x7000

　　Product classification: trapezoidal double-sided tooth synchronous belt -DT5 synchronous belt series
　　Product description: rubber trapezoid double layer tooth synchronous belt of the belt is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. In addition, the polyurethane is the double-sided tape of the material. The products have the characteristics of dynamic flexion, good anti-cracking, good ozone performance, aging resistance, heat resistance, oil resistance and wear resistance. The model of trapezoid double-sided synchronous belt includes: XL, L, H, XH, XH, XXH, T2.5, T5, T10, T20, AT5, AT10, AT20, etc.

　　1、It is strictly forbidden to break, bend, avoid strong layer damage and use value of T5.
　　2、It is forbidden to keep the T5 double tooth synchronous belt in an abnormal bending state for a long time.
　　3、Keep the T5 double-sided synchronous belt in the shade.
　　4、When installing, please shorten the center distance and relax the tensioning wheel. It is not allowed to force drag and drag from the bottom of the belt wheel.
　　5、The teeth of the T5 synchronous belt wheel must be at a right Angle to the running direction.
　　6、The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the service life.
　　7、It is found that the T5 double-sided gear on the active wheel is shifted to one side, the passive wheel should be adjusted and the pressure of the tensioning wheel should be adjusted.
　　8、At the start, the center distance is changed, the T5 double tooth synchronous belt relaxation, the occurrence of jumping tooth phenomenon, should check whether the belt wheel frame is loose, and the positioning of the shaft is not accurate. Adjust and reinforce.
　　9、The T5 double - double tooth synchronous belt must be properly tensioning with different models and bandwidths.
　　10、The tensioning wheel must be mounted on the side of the driving loose side.

　　Synchronous belt transmission is a new belt transmission which combines the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining metallurgy, iron and steel, machinery, medical equipment, the increasing demand, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber is widely used in machine, and other general machinery.

Model number	Section line length(mm)	Number of teeth	Model number	Section line length(mm)	Number of teeth	Model number	Section line length(mm)	Number of teeth
T5×500	500.00	100	T5×810	810.00	162	T5×1740	1740.00	348
T5×505	505.00	101	T5×815	815.00	163	T5×1760	1760.00	352
T5×510	510.00	102	T5×840	840.00	168	T5×1800	1800.00	360
T5×525	525.00	105	T5×850	850.00	170	T5×1880	1880.00	376
T5×540	540.00	108	T5×860	860.00	172	T5×1900	1900.00	380
T5×545	545.00	109	T5×885	885.00	177	T5×1940	1940.00	388
T5×550	550.00	110	T5×900	900.00	180	T5×1960	1960.00	392
T5×560	560.00	112	T5×910	910.00	182	T5×2120	2120.00	424
T5×570	570.00	114	T5×940	940.00	188	T5×2220	2220.00	444
T5×575	575.00	115	T5×990	990.00	198	T5×2260	2260.00	452
T5×580	580.00	116	T5×995	995.00	199	T5×2280	2280.00	456
T5×600	600.00	120	T5×1000	1000.00	200	T5×3060	3060.00	612
T5×610	610.00	122	T5×1020	1020.00	204	T5×3255	3255.00	651
T5×620	620.00	124	T5×1030	1030.00	206	T5×3290	3290.00	658
T5×630	630.00	126	T5×1045	1045.00	209	T5×3540	3540.00	708
T5×635	635.00	127	T5×1050	1050.00	210	T5×3750	3750.00	750
T5×650	650.00	130	T5×1060	1060.00	212	T5×4075	4075.00	815
T5×665	665.00	133	T5×1075	1075.00	215
T5×675	675.00	135	T5×1100	1100.00	220
T5×685	685.00	137	T5×1120	1120.00	224
T5×690	690.00	138	T5×1140	1140.00	228
T5×700	700.00	140	T5×1200	1200.00	240
T5×710	710.00	142	T5×1215	1215.00	243
T5×720	720.00	144	T5×1270	1270.00	254
T5×725	725.00	145	T5×1300	1300.00	260
T5×740	740.00	148	T5×1380	1380.00	276
T5×750	750.00	150	T5×1390	1390.00	278
T5×780	780.00	156	T5×1415	1415.00	283
T5×800	800.00	160	T5×1520	1520.00	304
T5×805	805.00	161	T5×1630	1630.00	326

Backwards

Prev:D-T2.5-T2.5x500－T2.5x5000

Next:D-T10-T10x500－T10x7050