STPD/STS-S8M

　　Product classification: round - tooth rubber synchronous belt -S8M synchronous belt series
　　Product introduction: compared with trapezoidal tooth synchronous belt, and small tooth root stress concentration, longer life transmitted power than 1.2 2 times the depth of ladder type, and the synchronous gear is better, drive back and forth in the process of clearance is very small. Product belt layer is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. The products include: 2M, 3M, 5M, 8M, 14M, 20M, S2M, S3M, S5M, S5M, S8M, S14M, RPP2M, RPP3M and other models

　　1、The S8M synchronous belt is strictly forbidden to break, bend, avoid strong layer damage and lose use value.
　　2、The S8M synchronous belt must not be stored in an abnormal bending state.
　　3、Keep the S8M synchronous belt in the shade to avoid direct sunlight, so the synchronous belt will age easily.
　　4、During installation, please shorten the center distance, relax the tension wheel, and not force the belt to be loaded from the bottom of the belt wheel.
　　5、The teeth of the S8M synchronous belt must be at a right Angle to the running direction.
　　6、The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the service 　　　life.
　　7、When the S8M synchronous belt is found on the active wheel, it should move the passive wheel to adjust and adjust the pressure of the tensioning wheel. 8. At the 　　　start, the center distance changes, the S8M synchronous belt loosens, and the jumping tooth phenomenon should check whether the belt wheel frame is loose, and 　　　the positioning of the shaft is inaccurate. Adjust and reinforce.
　　9、S8M synchronous belt installation must be properly tensioning with different models and bandwidths.
　　10、张紧轮且一定要安装在带动的传动松边一侧。张紧轮且一定要安装在带动的传动松边一侧。

　　Synchronous belt transmission is a new belt transmission which combines the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining metallurgy, iron and steel, machinery, medical equipment, the increasing demand, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber is widely used in machine, and other general machinery.

specification	Section line length	Number of teeth	specification	Section line length	Number of teeth	specification	Section line length	Number of teeth
S8M-480	480.00	60	S8M-1032	1032.00	129	S8M-1512	1512.00	189
S8M-520	520.00	65	S8M-1040	1040.00	130	S8M-1600	1600.00	200
S8M-560	560.00	70	S8M-1056	1056.00	132	S8M-1624	1624.00	203
S8M-584	584.00	73	S8M-1080	1080.00	135	S8M-1680	1680.00	210
S8M-592	592.00	74	S8M-1096	1096.00	137	S8M-1728	1728.00	216
S8M-600	600.00	75	S8M-1120	1120.00	140	S8M-1760	1760.00	220
S8M-632	632.00	79	S8M-1136	1136.00	142	S8M-1792	1792.00	224
S8M-640	640.00	80	S8M-1152	1152.00	144	S8M-1800	1800.00	225
S8M-704	704.00	88	S8M-1160	1160.00	145	S8M-1880	1880.00	226
S8M-712	712.00	89	S8M-1184	1184.00	148	S8M-2000	2000.00	250
S8M-720	720.00	90	S8M-1192	1192.00	149	S8M-2032	2032.00	254
S8M-760	760.00	95	S8M-1200	1200.00	150	S8M-2056	2056.00	257
S8M-800	800.00	100	S8M-1224	1224.00	153	S8M-2120	2120.00	265
S8M-824	824.00	103	S8M-1248	1248.00	156	S8M-2240	2240.00	280
S8M-840	840.00	105	S8M-1256	1256.00	157	S8M-2272	2272.00	284
S8M-848	848.00	106	S8M-1280	1280.00	160	S8M-2400	2400.00	300
S8M-880	880.00	110	S8M-1296	1296.00	162	S8M-2600	2600.00	325
S8M-896	896.00	112	S8M-1304	1304.00	163	S8M-2800	2800.00	350
S8M-920	920.00	115	S8M-1312	1312.00	164	S8M-2848	2848.00	356
S8M-960	960.00	120	S8M-1320	1320.00	165	S8M-3200	3200.00	400
S8M-976	976.00	122	S8M-1344	1344.00	168	S8M-3400	3400.00	425
S8M-984	984.00	123	S8M-1352	1352.00	169	S8M-3440	3440.00	430
S8M-1000	1000.00	125	S8M-1360	1360.00	170	S8M-3600	3600.00	450
S8M-1016	1016.00	127	S8M-1400	1400.00	175	S8M-4000	4000.00	500
S8M-1024	1024.00	128	S8M-1440	1440.00	180

Backwards

Prev:STPD/STS-S5M

Next:STPD/STS-S14M