HTD-5M

　　Product classification: round - tooth rubber synchronous belt -5M synchronous belt series
　　Product introduction: compared with trapezoidal tooth synchronous belt, and small tooth root stress concentration, longer life transmitted power than 1.2 2 times the depth of ladder type, and the synchronous gear is better, drive back and forth in the process of clearance is very small. Product belt layer is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. The products include: 2M, 3M, 5M, 8M, 14M, 20M, S2M, S3M, S5M, S5M, S8M, S14M, RPP2M, RPP3M and other models.

　　1,It is strictly forbidden to break the 5M synchronous belt, bend it, avoid the damage of the powerful layer, and lose the value.
　　2,The 5M synchronous belt must not be stored in an abnormal bending state.
　　3,Keep the 5M synchronous belt in a cool place and avoid direct sunlight, so the synchronous belt will age easily.
　　4,During installation, please shorten the center distance, relax the tension wheel, and not force the belt to be loaded from the bottom of the belt wheel.
　　5,The teeth of the synchronous belt pulley must be at right angles to the running direction of the belt.
　　6,The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the service 　　　life.
　　7,It is found that the 5 m synchronous belt on the active wheel is deflated to one side. It should move the passive wheel to adjust and adjust the pressure of the 　　　tensioning wheel.
　　8,At the start, the center distance is changed, and the 5 m synchronous belt loosens. The jumping tooth phenomenon should be checked if the wheel frame is loose and the 　　　positioning of the axle is inaccurate. Adjust and reinforce.
　　9,5M synchronous belt installation must be properly tensioning with different models and bandwidths.
　　10,The tensioning wheel must be mounted on the side of the driving loose side.

　　The synchronous belt drive is a new belt drive which combines the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining, metallurgy, iron and steel machinery, medical equipment demand increasing, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber machine, and other widely used in general machinery.

specification	Section line length	Number of teeth	specification	Section line length	Number of teeth	specification	Section line length	Number of teeth
180-5M	180.00	36	565-5M	565.00	113	950-5M	950.00	190
210-5M	210.00	42	570-5M	570.00	114	960-5M	960.00	192
225-5M	225.00	45	575-5M	575.00	115	965-5M	965.00	193
235-5M	235.00	47	580-5M	580.00	116	975-5M	975.00	195
250-5M	250.00	50	585-5M	585.00	117	980-5M	980.00	196
265-5M	265.00	53	590-5M	590.00	118	1000-5M	1000.00	200
280-5M	280.00	56	600-5M	600.00	120	1050-5M	1050.00	210
285-5M	285.00	57	610-5M	610.00	122	1080-5M	1080.00	216
295-5M	295.00	59	615-5M	615.00	123	1100-5M	1100.00	220
300-5M	300.00	60	625-5M	625.00	125	1125-5M	1125.00	225
305-5M	305.00	61	630-5M	630.00	126	1145-5M	1145.00	229
310-5M	310.00	62	635-5M	635.00	127	1150-5M	1150.00	230
320-5M	320.00	64	640-5M	640.00	128	1160-5M	1160.00	232
325-5M	325.00	65	645-5M	645.00	129	1175-5M	1175.00	235
330-5M	330.00	66	650-5M	650.00	130	1190-5M	1190.00	238
335-5M	335.00	67	655-5M	655.00	131	1200-5M	1200.00	240
340-5M	340.00	68	670-5M	670.00	134	1210-5M	1210.00	242
345-5M	345.00	69	690-5M	690.00	138	1225-5M	1225.00	245
350-5M	350.00	70	695-5M	695.00	139	1250-5M	1250.00	250
355-5M	355.00	71	700-5M	700.00	140	1270-5M	1270.00	254
360-5M	360.00	72	710-5M	710.00	142	1340-5M	1340.00	268
365-5M	365.00	63	715-5M	715.00	143	1350-5M	1350.00	270
375-5M	375.00	75	720-5M	720.00	144	1380-5M	1380.00	276
385-5M	385.00	77	730-5M	730.00	146	1400-5M	1400.00	280
400-5M	400.00	80	740-5M	740.00	148	1420-5M	1420.00	284
405-5M	405.00	81	745-5M	745.00	149	1455-5M	1455.00	291
410-5M	410.00	82	750-5M	750.00	150	1490-5M	1490.00	298
420-5M	420.00	84	755-5M	755.00	151	1500-5M	1500.00	300
425-5M	425.00	85	770-5M	770.00	154	1595-5M	1595.00	319
450-5M	450.00	90	780-5M	780.00	156	1690-5M	1690.00	338
460-5M	460.00	92	800-5M	800.00	160	1700-5M	1700.00	340
470-5M	470.00	94	810-5M	810.00	162	1720-5M	1720.00	344
475-5M	475.00	95	815-5M	815.00	163	1760-5M	1760.00	352
480-5M	480.00	96	825-5M	825.00	165	1800-5M	1800.00	360
490-5M	490.00	98	830-5M	830.00	166	1870-5M	1870.00	374
500-5M	500.00	100	835-5M	835.00	167	2000-5M	2000.00	400
505-5M	505.00	101	845-5M	845.00	169	2050-5M	2050.00	410
520-5M	520.00	104	850-5M	850.00	170	2100-5M	2100.00	420
525-5M	525.00	105	860-5M	860.00	172	2250-5M	2250.00	450
530-5M	530.00	106	890-5M	890.00	178	2350-5M	2350.00	470
535-5M	535.00	107	900-5M	900.00	180	2500-5M	2500.00	500
540-5M	540.00	108	920-5M	920.00	184	3255-5M	3255.00	651
550-5M	550.00	110	925-5M	925.00	185	3750-5M	3750.00	750
560-5M	560.00	112	935-5M	935.00	187	3770-5M	3770.00	754

div>

Backwards

Prev:HTD-3M

Next:HTD-8M