British ladder-type teeth -MXL

Product categories: trapezoidal tooth rubber synchronous belt - series product introduction: MXL synchronous belt layer rubber trapezoidal tooth synchronous belt of the belt is manufactured quality neoprene raw materials imported from Japan, skeleton layer is high quality glass fiber cord is imported from Japan, adopting high tooth surface wear-resisting layer adopts nylon 66 / do protection. The products have the characteristics of dynamic flexion, good anti-cracking, good ozone performance, aging resistance, heat resistance, oil resistance and wear resistance. Trapezoidal tooth synchronous belt models include: MXL, XL, L, H, XH, XH, XXH, T2.5, T5, T10, T20, AT5, AT10, AT20, etc.

1,The MXL synchronous belt is strictly forbidden to break, bend, avoid strong layer damage and lose the value of use.
2,The MXL synchronous belt should not be kept in an abnormal bending state.
3,Keep the MXL synchronous belt in the shade.
4,When installing, please shorten the center distance and relax the tensioning wheel. It is not allowed to force drag and drag from the bottom of the belt wheel.
5,The tooth of the MXL synchronous belt wheel must be at a right Angle to the running direction.
6,The parallel degree of the main axis of the active wheel and the passive wheel is controlled at the tangent = 1/1000. No axial position can directly affect the 　　　　service life.
7,Find that the MXL synchronous belt on the active wheel is sideways to one side, the passive wheel should be adjusted and the pressure of the tensioning wheel should be 　　　adjusted.
8,At the start, the center distance is changed, the MXL synchronous belt relaxation, the occurrence of jumping tooth phenomenon, should check whether the belt wheel 　　　frame is loose, and the positioning of the shaft is inaccurate. Adjust and reinforce.
9,The MXL synchronous belt must be properly tensioning with different models and bandwidths.
10,The tensioning wheel must be mounted on the side of the driving loose side.

Synchronous belt transmission is a new belt transmission which combines the advantages of belt drive, chain drive and gear transmission. Due to work like tooth shape, tooth of the pulley meshing transmission, and by the load on the tensile layer, to maintain with constant pitch line length, so there is no relative sliding between band and pulley, so that the main, driven wheel can do no slip between synchronous transmission. The speed range of synchronous belt transmission ranges from several revolutions per minute to the linear speed of 40m/s, the speed ratio can reach 10, the transmission efficiency can reach 99%, and the transmission power can range from a few watts to hundreds of watts. In recent years, mining metallurgy, iron and steel, machinery, medical equipment, the increasing demand, synchronous belt transmission is now in a variety of instruments, computer, sewing machines, textile machines, chemical fiber is widely used in machine, and other general machinery.

specification	Section line length	Number of teeth	specification	Section line length	Number of teeth	specification	Section line length	Number of teeth
40 MXL	101.6	50	85 MXL	215.39	106	189 MXL	479.55	236
42 MXL	107.7	53	88 MXL	223.52	110	192 MXL	487.68	240
43 MXL	109.73	54	89 MXL	227.58	112	198 MXL	503.94	248
44 MXL	111.76	55	91 MXL	231.65	114	200 MXL	508.00	250
45 MXL	113.79	56	92 MXL	233.68	115	205 MXL	520.19	256
46 MXL	117.86	58	94 MXL	239.78	118	208 MXL	528.32	260
47MXL	119.89	59	96 MXL	243.84	120	212 MXL	538.48	265
48 MXL	121.92	60	97.6 MXL	247.9	122	221 MXL	560.83	276
50 MXL	128.02	63	98 MXL	249.94	123	224 MXL	568.96	280
52 MXL	132.08	65	100 MXL	254	125	228 MXL	579.12	285
53 MXL	134.11	66	101 MXL	256.03	126	232 MXL	589.28	290
54 MXL	138.18	68	102.4 MXL	260.1	128	236 MXL	599.44	295
56 MXL	142.24	70	104 MXL	264.16	130	240 MXL	609.6	300
57 MXL	144.27	71	105 MXL	266.19	131	244 MXL	619.76	305
58 MXL	146.3	72	106 MXL	268.22	132	250 MXL	633.98	312
58.4 MXL	148.34	73	112 MXL	284.48	140	254 MXL	646.18	318
60 MXL	152.4	75	115 MXL	292.61	144	256 MXL	650.24	320
61 MXL	154.43	76	117 MXL	298.7	147	258 MXL	656.34	323
61.6 MXL	156.46	77	118 MXL	300.74	148	259 MXL	658.37	324
63 MXL	160.53	79	120 MXL	304.8	150	262 MXL	666.5	328
64 MXL	162.56	80	121 MXL	306.83	151	266 MXL	676.66	333
65 MXL	166.62	82	122 MXL	310.9	153	269 MXL	682.75	336
66 MXL	168.66	83	124 MXL	314.96	155	280 MXL	711.2	350
68 MXL	172.72	85	126 MXL	321.06	158	290 MXL	735.58	362
69 MXL	176.78	87	128 MXL	325.12	160	292 MXL	741.68	365
70 MXL	178.82	88	129 MXL	327.15	161	302 MXL	768.1	378
72 MXL	182.88	90	132 MXL	335.28	165	320 MXL	812.8	400
73 MXL	186.94	92	136 MXL	345.44	170	362 MXL	920.5	453
74 MXL	188.98	93	140 MXL	355.6	175	379 MXL	961.14	473
75 MXL	191.01	94	144 MXL	365.76	180	403 MXL	1024.13	504
76 MXL	193.04	95	152 MXL	386.08	190	418 MXL	1060.7	522

Backwards

Prev:Synchronous belt

Next:British ladle tooth -XL