The use of conveyor in industry is very wide. Nowadays, many transports use conveyor.
The conveyor will fail in many cases. There are many kinds of, the reason of the failure for conveyor fault rule out is very important, because the conveyor failure, not only affect the production, serious word will affect the security of person. The most common failure of the belt conveyor is that the conveyor belt will deviate.
There are many reasons for this failure, which is generally the low accuracy of the conveyor after long use, which is not installed in the installation process.
The slide between the drum and the belt is also a factor. The way to deal with this is to ensure the alignment of the entire center line, check the deviation of the end bearing and adjust the deviation of the bearing.
Setting wear is also a common fault, mainly for the environmental impact and production process of the whole transportation process. The equipment shows the wear condition, the best solution is to carry on the material replacement, should be protected when there is no material replacement.
The motor is also one of the frequent failures of the conveyor. Many of the reasons are due to the timing of the electric pilot, or the aging of the motor for long periods of use.
The correct way to do this is to check the line or change the motor.
Breakage is also a very dangerous fault, mainly due to the aging of the conveyor in the process of use, poor maintenance, or the rupture caused by the friction of fixed hard objects. It is very important that the conveyor belt should be kept in good condition even if it is adjusted.
The conveyor is playing an important role in the development of society.